ASTM D5787-1995(2000) 井保护监控的标准实施规程
时间:2024-05-19 19:19:18 来源: 标准资料网 作者:标准资料网 阅读:8812
【英文标准名称】:StandardPracticeforMonitoringWellProtection
【原文标准名称】:井保护监控的标准实施规程
【标准号】:ASTMD5787-1995(2000)
【标准状态】:现行
【国别】:
【发布日期】:1995
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:D18.21
【标准类型】:(Practice)
【标准水平】:()
【中文主题词】:地下水;井;表面防护;保护(装置);监视井;监控井;监控井;破坏行为;实施规程;井保护监控;井的破坏
【英文主题词】:groundwater;surfaceprotection;welldamage;wellprotection;wellvandalism
【摘要】:Anadequatelydesignedandinstalledsurfaceprotectionsystemwillmitigatetheconsequencesofnaturallyormancauseddamageswhichcouldotherwiseoccurandresultineitherchangestothedata,orcompletelossofthemonitoringwell.Theextentofapplicationofthispracticemaydependupontheimportanceofthemonitoringdata,costofmonitoringwellreplacement,expectedordesignlifeofthemonitoringwell,thepresenceorabsenceofpotentialrisks,andsettingorlocationofthewell.Monitoringwellsurfaceprotectionshouldbeapartofthewelldesignprocess,andinstallationoftheprotectivesystemshouldbecompletedatthetimeofmonitoringwellinstallationanddevelopment.Informationdeterminedatthetimeofinstallationoftheprotectivesystemwillformabaselineforfuturemonitoringwellinspectionandmaintenance.Additionally,elementsoftheprotectionsystemwillsatisfysomeregulatoryrequirementssuchasforprotectionofnearsurfacegroundwaterandwellidentification.1.1Thispracticeidentifiesdesignandconstructionconsiderationstobeappliedtomonitoringwellsforprotectionfromnaturalandmancauseddamageorimpacts.1.2Theinstallationanddevelopmentofawellisacostlyanddetailedactivitywiththegoalofprovidingrepresentativesamplesanddatathroughoutthedesignlifeofthewell.Damagestothewellatthesurfacefrequentlyresultinlossofthewellorchangesinthedata.Thisstandardprovidesforaccesscontrolsothattamperingwiththeinstallationshouldbeevident.Thedesignandinstallationofappropriatesurfaceprotectionwillmitigatethelikelihoodofdamageorloss.1.3Thispracticemaybeappliedtoothersurfaceorsubsurfacemonitoringdevicelocations,suchaspiezometers,permeameters,temperatureormoisturemonitors,orseismicdevicestoprovideprotection.1.4Thispracticeoffersasetofinstructionsforperformingoneormorespecificoperations.Thisdocumentcannotreplaceeducationorexperienceandshouldbeusedinconjunctionwithprofessionaljudgment.Notallaspectsofthispracticemaybeapplicableinallcircumstances.ThisASTMstandardisnotintendedtorepresentorreplacethestandardofcarebywhichtheadequacyofagivenprofessionalservicemustbejudged,norshouldthisdocumentbeappliedwithoutconsiderationofaproject'smanyuniqueaspects.Theword"Standard"inthetitleofthisdocumentmeansonlythatthedocumenthasbeenapprovedthroughtheASTMconsensusprocess.
【中国标准分类号】:E90
【国际标准分类号】:73_100_30
【页数】:5P.;A4
【正文语种】:
基本信息
标准名称: | 整体硬质合金锯片铣刀 |
英文名称: | Solid carbide slitting cutters |
中标分类: |
机械 >>
工艺装备 >>
刀具 |
ICS分类: |
机械制造 >>
切削工具 >>
铣刀
|
替代情况: | 替代GB/T 14301-1993 |
发布部门: | 中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会 |
发布日期: | 1993-04-17 |
实施日期: | 2009-04-01 |
首发日期: | 1993-04-17 |
作废日期: | |
主管部门: | 中国机械工业联合会 |
提出单位: | 中国机械工业联合会 |
归口单位: | 全国刀具标准化技术委员会(SAC/TC 91) |
起草单位: | 成都工具研究所 |
起草人: | 刘玉玲 |
出版社: | 中国标准出版社 |
出版日期: | 2009-02-01 |
页数: | 8页 |
计划单号: | 20064665-T-604 |
书号: | 155066·1-35618 |
适用范围
本标准代替GB/T 14301-1993《整体硬质合金锯片铣刀》。
本标准规定了整体硬质合金锯片铣刀的型式和尺寸、外观、表面粗糙度、位置公差、材料、硬度、标志和包装等基本要求。
本标准适用于直径8mm~125mm的整体硬质合金锯片铣刀。
本标准与GB/T 14301-1993相比主要变化如下:
——修改了原标准中的图1,其基本尺寸外径用d表示,内孔用D表示;
——修改了原标准中的表1(取消了基本尺寸d、D、L的极限偏差值和部分参考值γo、αo、g、Q、Kγ);
———修改了原标准中的3.2(在铣刀后加“的标记”三字);
———修改了原标准中的4.1(将外观要求中的污垢修改为:明显的空隙);
———修改了原标准中的4.2(将刀齿三侧面修改为:刀齿侧面);
———修改了原标准中的4.2(将内孔的表面粗糙度上限值Ra1.25μm 修改为:Ra0.8μm);
———修改了原标准中的4.5(在铣刀后增加:“推荐”两字);
———修改了原标准中的6.1(将硬质合金用途分组代号修改为:铣刀材料的牌号或用途代号);
———取消了原标准中的性能试验部分。
前言
没有内容
目录
没有内容
引用标准
下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T2075 切削加工用硬切削材料的分类和用途 大组和用途小组的分类代号(GB/T2075—2007,ISO513:2004,IDT)
所属分类: 机械 工艺装备 刀具 机械制造 切削工具 铣刀
基本信息
标准名称: | 化学品分类、警示标签和警示性说明安全规范 特异性靶器官系统毒性反复接触 |
英文名称: | Safety rules for classification、precautionary labelling andprecautionary statements of chemicals - Specific target organ systemic toxicity - Repeated exposure |
中标分类: |
综合 >>
标志、包装、运输、贮存 >>
标志、包装、运输、贮存综合 |
ICS分类: |
环保、保健与安全 >>
危险品防护
|
发布部门: | 中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会 |
发布日期: | 2006-10-24 |
实施日期: | 2008-01-01 |
首发日期: | 2006-10-24 |
作废日期: | |
主管部门: | 国家标准化管理委员会 |
提出单位: | 全国危险化学品管理标准化技术委员会 |
归口单位: | 全国危险化学品管理标准化技术委员会 |
起草单位: | 天津出入境检验检疫局、中国疾病预防控制中心、中化化工标准化研究所等 |
起草人: | 王利兵、尚为、张园、刘绍从、李宁涛、于艳军、吕伯钦 |
出版社: | 中国标准出版社 |
出版日期: | 2008-01-01 |
页数: | 【彩图】平装大16开开/页数:20/字数:28 |
计划单号: | 20032415-Q-469 |
适用范围
本标准规定了化学品引起的特异性靶器官系统毒性反复接触的术语和定义、分类、判定流程、类别和警示标签、类别和标签要素的配置及警示性说明的一般规定。
本标准适用于化学品引起的特异性靶器官系统毒性反复接触按联合国《化学品分类及标记全球协调制度》的危险性分类、警示标签和警示性说明。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 综合 标志 包装 运输 贮存 标志 包装 运输 贮存综合 环保 保健与安全 危险品防护